The 6F50 automatic feeding flour machine has carried out bold process improvements, and the cleaning process has been increased by screening and perfecting the cleaning process. The mixing process in the milling room improves the yield and the quality of flour. Pneumatic milling machine lightly grinds and finely grinds, wheat-core grading and sub-grinding of flour purifier, smooth roller milling, and impact milling to obtain high-grade special powder.
Our factory's 6F50 automatic feeding maize milling machine can grind wheat, sorghum, rice beans and other grains, chemical mills, and grain mills. The powder extraction rate is greater than 75%-80%, no heat, high efficiency, and low noise; it is an ideal flour mill for small and medium-sized individual processing industries in rural areas.
Features The 6F50 type automatic feeding flour machine is equipped with a fan, a closed air device, and a Shakelong lifting and unloading device, which can realize full air transportation and automatic cycle processing. The whole flour mill has the advantages of stable performance, reliability, and convenient operation.
The oil yield of peanuts is between 45% and 50%. In recent years, more and more users profit by using peanut oil machine to press peanut oil. Two days ago, people came and went to the oil press in the countryside, and the business is really good. Recently, some customers have reported that although the benefits of peanut oil extraction are objective, there are still some problems that make users worried. For example, how to control the residual oil rate in the peanut oil press cake and control the thickness of the cake.
We can understand the customer's concerns. The residual oil rate in the peanut cake after the peanut oil press has a direct impact on the oil output. Controlling the thickness of the oil cake is also related to the oil yield. Users will want to maximize their profits. Today, I will help you to solve how to control the residual oil in the peanut oil press cake and cake thickness.
The specific percentage of peanut oil yield is not fixed, which is mainly from the variety of peanut, planting, sun planting, storage of these aspects, can not be generalized. In order to minimize the residual oil rate in the oil cake, the following points should be paid attention to in the process of oil pressing. ① Peanut raw materials into the soybean oil machine to do fine processing before pressing, high oil quality, natural high oil yield.
(2) The peanuts should be dried before being pressed, and then miscellaneous. The content of impurity removal includes plant branches and leaves, stones, sand and other impurities in peanut oil. Many users overlook this essential preprocessing process. As everyone knows, not through the selection of peanut raw materials will not only greatly reduce the oil rate, but also accelerate the wear and tear of the machine. Here for you to recommend the peanut oil press special supporting equipment: peanut sheller, and vibration cleaning screen.
(3) The performance of the peanut oil press also has a crucial impact on the yield of peanut oil. From the peanut oil press equipment itself, it mainly relies on the pressure and temperature of the squeeze screw to squeeze the oil. The grade of peanut oil press and the thickness of oil line directly affect the quality of oil output. The distribution of the high pressure circular row and the pressure of the bore directly affect the residual oil in the oil cake.
Oil mill owners know that if the oil cake is too thick and the oil content in the cake is too high, the oil yield of peanuts will be directly reduced in the process of pressing. How to control the percentage of residual oil in the cake and the thickness of the cake when the peanut oil press presses peanut oil has become the concern of many customers. ABC Machinery cold press oil machine commercial from the perspective of customers, actively improve the research and development of new peanut oil press, launched the peanut oil press can not only control the cake thickness between 0.75-1.9mm, and the residual oil rate is controlled below 4%, in the oil press industry in the leader.
The oil output rate of peanuts is between
45%-50%. In recent years, more and more users have made profits by using peanut
oil presses to press peanut oil. Passing by the oil press in the countryside
two days ago, people come and go for business. It's not bad. Recently, some
customers reported that although the benefits of using peanuts to extract oil
are objective, there are still some problems that worry users. For example, how
to control the residual oil rate in the peanut cooking
oil machine cake and control the thickness of the cake.
We can understand that the customer’s concerns are that the residual oil rate
in the oil cake after the peanut oil press presses peanut oil directly affects
the oil output. Controlling the thickness of the oil cake is actually related
to the oil yield. Users definitely want to maximize their benefits. Today, I
will help you explain how the groundnut
oil machine controls the residual oil rate and the thickness of
the oil cake.
The specific percentage of peanut oil produced by the peanut oil press is not
fixed. It cannot be generalized from the aspects of peanut variety, planting,
seeding, and storage. To minimize the residual oil ratio in the oil cake, the
following points should be paid attention to during the oil extraction process.
①The peanut raw material needs to be processed carefully before it enters the
peanut oil press. The oil quality is high and the oil yield is naturally high.
②The peanuts should be dried before being pressed and removed. Impurity removal
includes plant branches and leaves, stones, silt and other impurities in peanut
oil. Many users will ignore this essential pretreatment process. As everyone
knows, unselected peanut raw materials will not only greatly reduce the oil
yield, but also accelerate the wear and tear of the machine. Here we recommend
special supporting equipment for peanut oil press: peanut sheller and vibrating
cleaning screen. ③The performance of the peanut oil press also has a vital
influence on the oil yield of peanuts. From the perspective of the mustard
oil mill itself, it mainly relies on the pressure of the
squeezer and the temperature of the snail to squeeze the oil out of oil. The
pressing grade of the peanut oil press and the thickness of the oil line
directly affect the quality of the oil. The distribution of the high-pressure
round row and the press chamber pressure directly affect the residual oil rate
in the oil cake.
The oil bosses of the oil mill know that if the oil cake is too thick and the
oil content in the cake is too high, the oil yield of peanuts will be directly
reduced during the pressing process. How to control the residual oil rate and
the thickness of the cake when the peanut oil press is pressing peanut oil has
become a concern of many customers. From the perspective of customers, ABC
Machinery's oil
mill project actively improves and develops new peanut oil press.
The launched peanut oil press can not only control the cake thickness between
0.75-1.9mm, but also control the residual oil rate at 4 below %, it is the
leader in the oil press industry.
The briquette making machine is a professional
equipment for processing biomass fuel. In the modernization process, a large
number of straws in our country are burned or discarded, which not only causes
serious environmental pollution, but also wastes valuable renewable resources.
The biomass fuel processed by the sawdust
charcoal machine has high density, high heating value, sufficient
fuel, Low cost, easy to use, clean and hygienic, easy to transport and store,
can be used as fuel for gasifiers, heating stoves, agricultural greenhouses,
boilers and power generation, as well as raw materials for the production of
biogas, fertilizer, feed and high-density boards, The use is very wide.
However, my country's biomass energy utilization industry started relatively
late, and the research and development of rod-making machines has happened in
recent years. Some users also worry about the economic benefits of biomass fuels
during the investment process. Let us introduce the economic benefits of some
biomass fuels processed by rod making machines?
In the international market, the application and development of charcoal
making machine are much earlier. Nowadays, solidified biomass fuel
has been commercialized in Japan, the European Union, the United States and
other countries and regions. It is very popular and convenient and can be
bought in supermarkets. In the Chinese market, it appears as a new type of
product. Let's take corn stalks as an example to explain the economic benefits
of biomass fuel processed by rod making machines.
Take corn stalks as an example: the calorific value is about 0.8-0.9 times that
of coal, that is, 1.1t corn stalk briquette is equivalent to 1t coal. If the
corn stalk briquette is burned in a down-fired biomass burning boiler, the
combustion efficiency is 1.3-1.5 times that of a coal-fired boiler. Therefore,
the heat utilization rate of 1 ton of corn stalk briquette fuel is equivalent
to or even higher than that of 1 ton of high-quality coal. The CO2 emission of
combustion exhaust gas is close to zero. NO2 emissions are 14mg/m3.so2 and soot
emissions are far below the national standard. Therefore, the biomass fuel
processed by the briquette
machine has important environmental protection and energy saving
significance, which lays the foundation for its market application. Next, let's
calculate an account.
At present, the purchase price of crop straw is 160 yuan/t, the energy
consumption for producing straw briquette fuel is 70kwn/t, equivalent to 70
yuan/t, the labor cost of straw briquette fuel is 45 yuan/t, and the equipment
depreciation is 10 yuan/t. The maintenance fee is 5 yuan/t, and other costs are
calculated at 10 yuan/t, then the production cost of 1t of straw briquette fuel
is 300 yuan/t, and now the selling price of straw briquette fuel is about 450
yuan/t, then 1 straw briquette The fuel processing plant has an annual output
of 3,000 tons and generates revenue of 450,000 yuan a year. Basically, the
investment can be recovered in one year, and the economic benefits are very
significant. In addition, biomass fuel is about 170 US dollars/t in the US
market. If the cost does not exceed 300 yuan/t, it is exported at 70-80 US
dollars/t. Such a price is competitive in the international market.
Through the above analysis, it is not difficult to see that the biomass fuel
processed by the biomass
briquette machine not only has good environmental protection and
energy saving significance, but also has good economic benefits, so it will be
promoted. As a professional production equipment rod making machine, it will
also have a good market prospect.
City Machinery specializes in the production of biomass rod making machines and
rod making machines. More products are available: www.gemco-energy.com.
On March 21 this year, with the help of
friends from Rizhao, a Korean customer came to ABC Machinery to inspect the wood
pellet machine. The customer was very satisfied with our equipment
and successfully traded two wood pellet machines on the spot.
The customer has a branch in China, and a large boiler needs a certain amount
of biomass pellet fuel, so he wants to produce and process this piece by
himself. According to some requirements of the customer, the company led the
customer to visit the vertical ring die wood pellet machine and the counterflow
cooler, Screening equipment, etc., and then let the customer personally operate
the prototype of the vertical ring die wood pellet machine for trial. According
to the customer's requirements, we prepared the sawdust raw materials for
pellet compression. The customers are very satisfied with the pellets, and they
also have a certain understanding of the performance and operation methods of
the machine. The customer is very satisfied with the company's equipment and
services based on his own operation of the wood pelletizer
machine, and decided to establish a partnership with our company and
let our company become his equipment supplier.
Visit the wood pellet machine to Anyang ABC Machinery. The ABC Machinery brand
wood pellet machine leads the trend in the pellet mill
industry and is in a leading position in the biomass industry. Welcome to ABC
Machinery.
In
recent years, air pollution and smog are rampant, and energy conservation,
emission reduction, and the development and use of new energy are urgent. The
National Energy Administration also mentioned the new energy cooperation
framework at the previous 2014 APEC meeting. APEC leaders listened to China’s
energy development plan, deepened the revolution in consumption, supply, technology,
and systems, and strengthened international cooperation, insisting on “saving,
clean, and safe” Implements the four major strategies of “saving priority,
domestically based, green and low-carbon, and innovation-driven”, through
vigorously promoting energy conservation, clean and efficient development and
utilization, enhancing independent guarantee capabilities, vigorously
developing non-fossil energy, and promoting energy technology innovation,
Measures to expand international energy cooperation, deepen energy system
reform, and accelerate the construction of a clean, efficient, safe, and
sustainable modern energy system. It can be seen that the development of new
energy is China's top priority in the treatment of environmental pollution, and
there is a long way to go in treatment and development.
In response to the emergence of wood chip making machines, charcoal
making machine can turn agricultural and forestry wastes, such as
wood chips, straw, bark, rice husk and other combustible materials into biomass
rod fuel, to replace the traditional high energy consumption. Polluting energy,
biomass fuel has low-carbon, environmentally friendly characteristics, convenient
transportation, and raw material sources can be seen everywhere. Now biomass
energy has a trend to replace traditional energy. ABC Machinery specializes in
the production of sawdust
briquette maker, biomass
briquette machine, more products log in: www.bioenergy-machine.com.
1. The effect of using the same raw material on different sawdust briquettes making machines is occasionally very different: the reason is the difference in the clearance between the rod making machine's advancing screw and the forming sleeve.
2. Smoke comes out from around the rod during rod making, and the rod made is rougher than it will be: the reason is that the raw material used for making the rod is too dry, and the clearance between the propeller and the forming cylinder is too high and the temperature is too high.
3. In the process of making the rod, it was discovered that the shot, the abnormal rod, and the eye plugging were found: the reason for this phenomenon was that the front edge of the screw propeller was worn too seriously. 4. The pay rod produced by the charcoal making machine has a certain density. If the pay rod breaks as soon as it is broken, and there is a light on the broken wall: it is because the initial position of the spiral front is too high. 5. During the process of rod making, it was found that carbonization was found when the temperature was slightly higher, but if the temperature was slightly lower, it would not be good: the forming sleeve of the rod making machine was worn too seriously. 6. Too low temperature, excessive wetness of raw materials or improper fit clearance are the important reasons that lead to unsatisfactory production and firing. 7. If the raw material of the rod is not dried and the humidity is high, the rod will bend. 8. Excessive adjustment of the propeller screw of the rod making machine or high temperature will result in poor density and fast speed of the rod.
9. The rod output rate slows down after replacing the screw with the same raw material: the screw angle of the screw is too high, it needs to be repaired and polished. 10. When the raw material is too wet or the rod cannot be produced due to other reasons, it is because the sawdust briquette press has been running for a long time and the phenomenon of gas return is found. 11. If the screw of the propeller of the horse manure brick maker is too short or worn, the rod will not be produced and the screw will run idly. 12. The rod cannot be produced and the screw is screwed: the temperature is too low, the screw is too short or worn.
The increasingly prominent world energy problems have seriously affected the rapid development of social economy, and the concentrated use of fossil energy on a large scale has released a large amount of carbon dioxide, sulfur dioxide, nitrogen oxides and other substances, which have harmed the living environment of mankind. Straw fuel has been favored by more and more people because of its reusability, low pollution and universal dispersibility. We understand from the market that because straw fuel is used by more and more people, wood pelletizing equipments are extremely popular.
The sawdust pellet machine uses solid waste such as corn stalks, wheat straw, rice straw, peanut husks, corn cobs, cotton stalks, soybean stalks, weeds, branches, leaves, sawdust, bark and other solid wastes of crops as raw materials, which are crushed, pressurized, It is a machine for densification and molding to become a small rod-shaped solid particle fuel. Xiao Zhang, who makes peanut processing, told us, “In the past, there was always no way to take these peanut shells, and there was no way to throw them away. Let’s burn them as firewood. The smoke can choke people. Now it’s fine, buy it. I used a wood pellet machine to process these peanut shells into pellet fuel for heating in winter. Nowadays, coal is becoming more and more expensive, and it’s just right to use it. Save money and worry." We interviewed ABC Machinery, a veteran manufacturer of wood pellet machines, and the relevant person in charge told us, “Nowadays, more and more people are buying wood pellet machines, and we are also stepping up production to meet market needs. At the same time, we will discuss innovations. More products, let the wood pellet mill serve more people."
According to the prediction of the International Renewable Energy Organization, the open reserves of oil, natural gas and coal will only be used for about 60 years at the current rate of exploitation and application. Therefore, straw-based biomass energy is an important development direction of renewable energy in the future. With the global energy shortage, the market demand and profit margins for straw fuel will be immeasurable. There is nothing wrong with choosing Anyang ABC Machinery's sawdust pelletizer, sawdust pellet machine, and sawdust shredder. It is energy-saving and environmentally friendly. Our company guarantees the quality of production and will definitely provide you with the most satisfactory service!
With the development of society and the progress of science and technology, charcoal machines are also continuously updated. So far, the charcoal machines have been developed to the third generation. Both equipment quality and service have been praised by customers. As a senior charcoal machine factory, Below we cooperate to understand what are the ingredients that will always affect the output of charcoal machines.
Friends all know that the ingredients that affect the output of charcoal making machine are: the types of raw materials, equipment construction, equipment maintenance, and the skills of the workers who build the charcoal. One: Types of raw materials Different raw materials, using the same equipment, the output is also different. Friends know that plants are divided into woody and herbaceous. The raw materials of the wood family have high carbon content and low ash content, so the charcoal output will be high, and the charcoal produced has a high calorie, and it is also a very popular charcoal in the current environmental trend. The raw materials of the grass family have low carbon content and high ash content, so the amount of charcoal will be greatly reduced, and the calories of the charcoal produced are not as high as the calories of the wood family. It can only be used for home use, so sales are not too ideal. 2: Equipment construction A good horse is equipped with a good saddle. Only the equipment construction is very good, which can greatly improve the output of the biomass briquettes machine. Many customers purchase the charcoal briquette machine with cheap temporary plans and choose very cheap equipment. As everyone knows, this is the case. It hurts me. The equipment costs of each production factory are controlled by the old, steel material costs, labor costs, water and electricity costs, etc. The factory will not do a loss-making business. The cheaper the equipment you buy, the more the factory uses. The thinner the raw material, the lower the power of the motor. For a long time, the equipment not only consumes fast, but the output of small horse-drawn carts is not much higher.
3: Equipment maintenance No matter what things are carefully maintained, you only need not to raise them. Sooner or later, I will pick you up. The very important thing in maintenance is the propeller of the sawdust briquette machine. It must be polished and corrected every time it is used. The other is to add grease to the equipment. Clearing out sundries for equipment, etc. There are specific analyses on the analysis books of the factories that require maintenance. 4: The skills of workers who build charcoal Every production joint has strict requirements, such as the size of the raw material crushing, the humidity of the raw material, the proportion of each raw material entering the carbon when a variety of raw materials are mixed, the carbonization time during the carbonization, the temperature control, etc. If the worker does not mastering these techniques, whether it’s spicy, it’s not a good job, or the charcoal produced by the carbonization is not enough. It wastes raw materials and delays time.
Biomass fuel granulation process. The basic process steps of biomass granulation are roughly similar. However, due to the different physical properties of the raw materials and the different working principles of the forming wood pellet machine, the specific process is still different. The key process steps of the flat die machine are specific. The introduction is as follows:
In the crushing process, when the flat mold is used for granulation, the smaller the particle size of the raw material, the easier it is for the particles to fill and fit each other. Therefore, the average energy consumption per unit output of the granulator is smaller. The wear speed is also slower, and the water permeability and hardness of the particles are higher. However, blindly pursuing the reduction of particle size will cause the energy consumption of the crushing process to rise sharply. Therefore, it should meet the processing requirements of flat die granulators under the premise of, make the particle size as large as possible. In fact, it is one of the advantages of the flat die wood pellet maker to be able to suppress large-size raw materials. Generally, for crop straw and other raw materials, the maximum particle size is required to be less than 2×2×30mm, while for wood raw materials, the requirements are more stringent.
In the granulation process, the dried material enters the granulation process and can be processed directly without quenching and tempering. Conditional manufacturers can choose automatic control system and die roll automatic gap adjustment device. The automatic control system adjusts the frequency converter of the feeding motor according to the change of the host current, so as to adjust the feeding amount in real time, which can effectively avoid the occurrence of machine blockage. The die roll automatic gap adjustment device can collect die roll gap data, and control the hydraulic system through feedback and comparison, so that the gap is consistent with the set value, and can be changed at any time during the production process. Generally speaking, the grinding roller gap should be as small as possible during the starting phase, which can reduce the starting torque and reduce the motor load. After entering the steady state work, the grinding roller gap should be slightly larger, which can increase the compression stroke and obtain hard and smooth particles. The setting of the gap change with time can be input into the control system. After starting, the machine can automatically adjust the die roll gap. Pressure rollers and flat molds are easy to wear parts and need to be replaced regularly. The service life of pressure rollers can be slightly longer, but it is best to replace the flat molds together. Generally, flat molds can work for 800-2000 hours, depending on the material and processing technology of the parts. According to the test results, the PM60 flat die pelletizer is suitable for processing biomass materials such as sawdust, sawdust and straw mixture, with a molding rate of over 93%, power consumption per ton under 55 kWh, and an hourly production capacity of about 800kg-900kg. There is nothing wrong with choosing Anyang ABC Machinery's pelletizing machine, sawdust pellet machine, and sawdust crusher. It is energy-saving and environmentally friendly. Our company guarantees product quality and will definitely provide you with the most satisfactory service!
The wood pellet mill is an emerging industry, the market prospect is broad, the support of national policies, the momentum of the past two years, the rapid development.
The mold of the hemp pellet mill has high hardness, strength, red hardness, wear resistance and toughness of the steel, but also has good high temperature strength, thermal fatigue stability, thermal conductivity and corrosion resistance, but also requires high hardenability, in order to ensure that the whole section has the same mechanical properties.
In addition, small thermal deformation, good machining performance, maintenance of welding performance and working conditions, size and shape stability. The carbon content in the die steel must be appropriate for the carbon alloy structural steel. The first-class steel smelting adds more alloying elements eutectoid or hypereutectoid steel, so the price is expensive, several times more than the general price of ordinary carbon structural steel.
This alloy steel and the need to use better multiple heat treatment process, ordinary carbon steel only needs a simple quenching heat treatment process, the heat treatment cost is naturally much higher than the ordinary steel manufacturing mold price. But its use of durable shapes, forming stable shapes and repeated many times for maintenance increases the reliability of molds compared to ordinary materials. Remind the majority of users to choose the pellet machine can not only pay attention to the price level, more is concerned about the quality of the pto pellet mill, pay attention to the quality of the core parts of the mold pellet machine, rather than dumping cheap suffer a great loss.
The operation method of the pellet machine.
In animal
feed business when the customer uses the pellet machine, there may
be some other reasons that cause problems in the pellet machine production
process.
Nowadays, many customers cannot achieve the ideal production because
the pellet machine is used incorrectly. Efficiency, so when you use the pellet
machine for actual production, you need to constantly master new technologies.
The following is the experience accumulated in the actual production process,
combined with some customer feedback opinions, some tips summarized: 1. Feeding
should be even. This has the advantage of making the granulation of the animal
feed manufacturing process machine smoother and keeping the machine
running at high speed. 2. Choose the appropriate template aperture according to
your own use. Some users use too small apertures, and often have low output or
even no discharge. They hope to ask the salesperson carefully when buying a
pellet machine what size template should be equipped. 3. Adjust the gap between
the template and the pressure roller. Appropriate pressure can achieve a good
effect on the maturation and compactness of the particles. 4. Keep the pellet
machine clean. Users often do not pay attention to keeping the poultry
feed plant clean during use, which speeds up the life of the pellet
machine, so pay attention to keeping the feed
making machine clean. It is best to clean up regularly. 5. Regularly
keep the granules lubricated, and add butter and lubricant regularly. Regularly
cleaning the template, and generally adding butter can improve the efficiency
of the machine.
At present, the vast majority of users invest in the new type of straw charcoal machine, not only to promote the development of China's energy conservation and environmental protection cause, but also to create better value in the industry, in the choice of the new type of charcoal machine, users need to pay attention to what issues?
New type of straw charcoal machine production line equipment installation first step: before starting the new type of straw charcoal briquettes machine, need to do the preparation work and operation procedure.
When debugging the host to verify the equipment, first let the host manually rotate to see whether it is stable, and then use the size of the gear equipment to check whether the operation is normal; Through the circuit diagram installation diagram, install the correct circuit, start.
Motor, check whether the operation is normal; Secondly, open the dust removal equipment, check the normal pressure of the air pump, whether there is leakage, dust removal; Thirdly, it is necessary to open the burner, adjust the flame appropriately according to the temperature, and control the temperature strategy; Adjust the speed of the dryer to the right range.
The new wood chip log making machine is a complete set of equipment, including pulverizer, dryer, rod making machine and carbonization furnace. In the whole operation process, the material is first crushed, then dried by the dryer, after the rod making mechanism into the carbonization process.
The moisture content of the material is controlled between 6% and 12%, while the standard setting of the dryer requires the outlet temperature to be controlled at 60 degrees and the moisture content to be controlled between 35% and 6%.Operators can also adjust the drying temperature according to their own needs, set the export temperature unchanged, raw material moisture content does not exceed 35%.
ABC MACHINERY has been providing high quality wood pellet machine to our customers since its establishment. Granular machine equipment with renewable biomass energy as fuel, to achieve the sustainable use of energy, the use of high temperature segment combustion technology, flue gas NOx, SO2, dust and other low emissions, is the best substitute for fuel (gas) combustion machine, electric heating; No tar, waste water and waste emissions: using high temperature pyrolysis combustion technology, such as tar directly in the form of gas burning, solved the high biomass gasification tar content of technical difficulties, avoid the secondary pollution of water quality, water washing tar by lower operating costs, and ABC Machinery particles machine design is reasonable, when used in a variety of equipment modification cost is low. When running, the heating cost is reduced by more than 60% than that of oil-fired boilers, and by more than 40% than that of gas-fired boilers. It is the best choice for energy saving and environmental protection transformation and upgrading of electric boilers, oil boilers and gas boilers. Granule machine is simple to operate, easy to maintain, the use of frequency conversion automatic feeding, wind ash removal, simple operation, small workload, single duty, granule machine is the best choice for the majority of enterprises. We also provide poultry feed making machine, poultry feed processing plant.
What is the structure of the complete set of large and medium-sized flour mills? Large flour mill is composed of four systems: power, feed, grinding and separation. The power system includes motor, pulley, triangle belt, spindle pulley and spindle composition; The feeding system consists of hopper, limited plate and feeding pipe; The grinding system is composed of grinding body and supporting leg. The separation system consists of a brush mounted on the main shaft, a spherical bottom with a net, a pressing screw and a frame mounted on the bottom of the grinding body.
The large maize milling process machine comprises a frame, a power shaft installed on the frame and a grinding cone connected with the power shaft and matched with a mill with a feed port. The technical scheme is as follows: a gap adjusting mechanism between the mill and the grinding cone is arranged along the axial direction of the power shaft. It can be adjusted according to the grain size to be processed (such as corn, wheat, etc.) and the different requirements of the grain thickness after processing to meet the requirements of different users. Above centrifugal discharger shell side is equipped with the feed pipe, centrifugal discharger shell is equipped with air outlet, above the centrifugal discharger shell side is equipped with miscellaneous mouth, the mouth of the complicated with mesh screen, screen mesh of the lateral has a cover plate, rows below the miscellaneous mouth set conversion valve connection pipe, to be able to with food particles falling dust remove debris, the manufacturing cost is low, the use of low energy consumption.
Large flour mill is in the existing cone grinding head of fixed grinding head and moving grinding head grinding head out of the grinding groove end, each added a circle of thickness and grinding tooth height of the same plug. In this way, the powder particles that can not be fully broken between the grinding teeth can not pass through the plug, and the powder particles that pass through the plug can be further ground, so as to improve the fine powder rate, fine powder quality and grinding surface efficiency of wheat, and the grinding teeth are not easy to damage.
From the above analysis, we understand the structural characteristics of large and medium-sized flour machine equipment, we have a detailed understanding of the flour machine structure in order to better use our equipment to strive for the maximum benefits! ABC MACHINERY specializes in the production of flour mills, wheat mills, flour mill plant, rice mill plant cost, large steel frame type flour mills and other equipment. Please contact us for more information!
Before debugging the cattle feed business pellet machine, it is necessary to wash the warehouse before debugging, remove the stones and welding slag left during the installation, and check whether the steam pipeline system used has a good decompression function and drainage function to ensure The dry and saturated tempering steam required for granulation, and can ensure that there is always 0.058-0.4MPA steam after the pressure reducing valve. Before starting the feed pellet machine, the distance between the pressure roller and the ring die must be adjusted, generally rotating When the ring die, the pressure roller seems to rotate and not rotate, and the distance between the ring die and the pressure roller must not be adjusted too small, which will cause direct friction, which will not only accelerate the wear of the ring die and the pressure roller, but also reduce the unit output during production. The other is that the feeding amount should not reach the maximum instantaneously when running the cattle feed pellet machine, and a little material should be added while adding a little steam at the same time to make the feeding amount reach the ideal value for about 5-10 minutes.
ABC Machinery specializes in the production of sawdust pellet machines, poultry feed business pellet machines and rod making machines. More products are available: http://www.gemco-energy.com.
Biomass wood pellet machine manufacturers share: 2014 annual total energy consumption of 4.26 billion tons of standard coal, an increase of 2.2% over the previous year.
Coal consumption decreased by 2.9 percent, crude oil consumption increased by 5.9 percent, natural gas consumption increased by 8.6 percent, and electricity consumption increased by 3.8 percent.
Coal consumption accounted for 66.0 percent of total energy consumption, and clean energy such as hydropower, wind power, nuclear power and natural gas accounted for 16.9 percent of total energy consumption.
Raw coal production fell 2.5 per cent to 3.87 billion tonnes. Natural gas production rose 7.7% to 13.016 billion cubic meters.
Nuclear power generation grew by 18.8%, hydropower by 15.7%, and thermal power by 0.3%.
ABC Machinery animal feed production machine Manufacture strongly present to our new products every year and produce the value addition machines for wood pelletizer industry.
During the operation of the soybean oil machine, sometimes due to improper operation or long use time, the vulnerable parts of the oil press are damaged. In this case, it is necessary to replace the accessories. During the sales process recently, some customers are asking about the inside of the mustard oil mill Some customers are not very familiar with the oil press structure, so there will be some problems when replacing the snails. Let’s take a look at the problems that should be paid attention to when replacing the oil press in oil mill business:
(1) The method of dismantling the screw: immediately move the handle after stopping the machine to pull the press shaft out of the press chamber, remove the protective cap, hexagonal nut, round nut and adjusting bolt, and insert a 16-diameter iron rod into the lock nut Rotate clockwise in the hole (remember that the threads matching the shaft core are all left-handed), after removing the lock nut, each section of the screw can be removed. If the snails (with fine slag in the inner hole) are blocked and difficult to disassemble, you can put a wooden board on the ground, and the two of them will knock the snails a few times to remove them. If they still can’t be removed, they can be heated with wood fire. Remove.
(2) Installation of the screw press: erect the screw press with the thin end upwards, install the retaining ring, install the screw press on the shaft in turn from No. 1, and then tighten it with a lock nut to prevent the oil residue from being pressed deeply. The screw hole affects the disassembly of the screw press. (The adjusting nut makes the two ends of the adjusting bolt have 8309 bearings. When installing, the large hole surfaces of the two bearings are against the two ends of the adjusting bolt. After the screw is installed as a whole, use two (M42×62) nuts to back tightly Pay attention to the gap between the two 8309 bearings at all times. Move the adjusting bolt by hand to feel flexible when it turns.
Some customers are afraid that the order will not be found after removing the accessories. In fact, there is a simple way to mark the new accessory vendor according to the old accessory, and then install it according to the mark. There should be no problem.
In the wheat flour production process, we need to go through a process, that is, tempering the wheat, which is a key step. The length of the tempering time determines the quality of the flour produced, so we are using the flour machine to process the flour. At this time, we must first reasonably control the tempening time to produce better quality flour! Next, the ABC Machinery flour mill business manufacturer will tell you how to control the wheat flour milling time! Hope it can be helpful to everyone!
After the raw material passes through the water machine, the water just added is mainly concentrated on the surface of the wheat grains. For the whole raw material, the distribution of water is not balanced. Therefore, the wheat after the water has to be kept in a closed state, and the surface is made by conduction and penetration. The water is evenly distributed inside the wheat grains and the whole raw material. To achieve this, the key factor is sufficient time to temper the wheat. It usually takes 8 hours for the water on the wheat skin to penetrate uniformly in the grain, and it takes about 12 hours to complete the physical and chemical combination with the internal material of the wheat, volume expansion and heat generation, and to exist in the grain structure in a relatively stable state, but It takes longer to achieve the balance of water in all the grains through the conduction between the grains. When the one-time impingement process is used, the tempering time is generally controlled between 16-30h. When the two impingement process is used, the first time is usually greater than the second time, correspondingly, the first time of dampening is about 20h, and the second time is about 16h.
The above content is the scope of the time control of the tempering process in the flour milling process, everyone should study hard! The length of the tempering time affects the quality of the flour, so I hope you can study the tempering time carefully and use it for yourself! ABC Machinery specializes in the production of flour production equipment such as flour mills, flour processing equipment, flour mill project, and wheat flour milling machines.
1. When disassembling the feed pellet machine, prepare for assembly. In order to improve the assembly efficiency and ensure the correctness of the assembly, attention should be paid to check and mark when disassembling. 2, the surface soil and oil should be removed before disassembly, and it should be kept clean during disassembly. 3, disassemble as needed, disassemble as little as possible, and do not disassemble if disassembly is not allowed. 4. When disassembling the poultry feed business pellet machine, use suitable tools, do not hit hard, so as to avoid damage or deformation of the parts. 5. The feed pellet machine should be disassembled in a reasonable order, usually from the accessories to the main part, from the outside to the inside, first disassemble the whole poultry feed making machine into an assembly, then disassemble the assembly into parts, and disassemble the parts into parts.
