The correct disassembly steps of the pellet machine

The correct disassembly steps of the
cattle feed business pellet machine:

1. When disassembling the feed pellet machine, prepare for assembly. In order to improve the assembly efficiency and ensure the correctness of the assembly, attention should be paid to check and mark when disassembling.
2, the surface soil and oil should be removed before disassembly, and it should be kept clean during disassembly.
3, disassemble as needed, disassemble as little as possible, and do not disassemble if disassembly is not allowed.
4. When disassembling the poultry feed business pellet machine, use suitable tools, do not hit hard, so as to avoid damage or deformation of the parts.
5. The feed pellet machine should be disassembled in a reasonable order, usually from the accessories to the main part, from the outside to the inside, first disassemble the whole poultry feed making machine into an assembly, then disassemble the assembly into parts, and disassemble the parts into parts.

 

Feed granulator output

There are many users in the purchase of livestock feed manufacturing equipment will be wondering how much granulator can make an hour granule feed?At present on the market granulator factory said he is the most professional, the best quality, as the saying goes, "Wang Po selling melons boast" who said their production poultry feed making machine is high output high configuration.Specific feed granule machine for an hour of output, because the model is more, different models of machine output is not the same, feed granule machine has large, medium, small, for a few examples:
General family farmers small size can choose a small poultry feed production granulator, small granulator models there are three types, are 150, 200, 260, the specific output is as follows:

 Model Number: ZLSP-D 150
Power: three-phase 3/ single-phase 2.2kW
Feed yield: 60-100 kg per hour
Model Number: ZLSP-D 200
Configuration power: three-phase 5.5kw
Feed yield: 90-120 kg per hour
Model No. : ZLSP-D 260
Power: 7.5 kW three-phase
Feed yield: 200-300 kg per hour
General large and medium-sized aquaculture, food feed processing plants, livestock farms and other small production machine is not enough, you can choose a large feed granule machine, large production of equipment models are 250, 350, the specific output is as follows:
Model: BPM250
Power: 22 kW three-phase
Feed yield: 1000-2000 kg per hour
Model: BPM350
Power: three-phase 30*2 kW
Feed yield: 3000-7000 kg per hour

 

Maintenance knowledge of precision parts of small feed pellet machine

We must be very careful when removing these parts of poultry feed pellet machine, do not make scratches on the surface of these parts, if the scratches are made carelessly, this part will appear abnormal noise when working, serious It will stop working. In addition to paying attention to these problems when disassembling, we should also pay more attention when assembling the poultry feed mill. First, when assembling the gears of this machine, we must see clearly that the crankshaft of this machine is It's not very clean, if not clean.

We need to use a softer rag or a new towel to remove the oil and impurities on it, and then apply a layer of oil on the crankshaft, so as to ensure that the crankshaft is rotating. There will be no interference phenomenon, and when we install this gear, we must be optimistic about the gear's occlusal direction. We must install along the gear's occlusal direction. If we do not follow the gear's occlusal direction. If it is installed, the gear may break when the pellet machine rotates. When installing gears, apart from clarifying these directions, it is more important to look at the bite density of these gears. The bite density of these gears will change with the tightness of our screws. Only if we carefully install our small feed making machine will it not be hurt!

The characteristics and access of GEMCO small feed pellet machine

Features of small livestock feed manufacturing machine
1: The processing range is wide. Regardless of the biomass raw materials we can find, such as miscellaneous wood, pine wood, bamboo shavings, peanut hulls, rice husks, straws, etc., pellets can be made without any additives.
2: The density of processed particles can reach 1.1*10³kg/m³

3: Ensure that the maximum length of the biomass raw material does not exceed the die hole diameter. For example, with a 6mm flat die, the feed length cannot exceed 6mm.
4: Ensure that the moisture of biomass raw materials is controlled between 10%-18%, and different raw materials require different moisture. For example, pine wood containing lignin or sugar-rich raw materials requires low moisture, otherwise, high moisture is required.

5: Compression ratio of flat die holes, different raw materials, due to different bulk density, the amount of lignin contained varies, so the need is different in the form of die holes to achieve better molding results. The flat die equipped with our small animal feed mill is processed according to the data obtained from a large number of experiments on different raw materials. The effect on general raw materials will be better, but if the chicken feed pellets made by the customer’s materials appear dusty and become when the new rate is low, we will adjust the flat die compression ratio according to the material.