What are the factors that affect the output of charcoal machines

 With the development of society and the progress of science and technology, charcoal machines are also continuously updated. So far, the charcoal machines have been developed to the third generation. Both equipment quality and service have been praised by customers. As a senior charcoal machine factory, Below we cooperate to understand what are the ingredients that will always affect the output of charcoal machines.

Friends all know that the ingredients that affect the output of charcoal making machine are: the types of raw materials, equipment construction, equipment maintenance, and the skills of the workers who build the charcoal.

One: Types of raw materials
Different raw materials, using the same equipment, the output is also different. Friends know that plants are divided into woody and herbaceous.
The raw materials of the wood family have high carbon content and low ash content, so the charcoal output will be high, and the charcoal produced has a high calorie, and it is also a very popular charcoal in the current environmental trend.
The raw materials of the grass family have low carbon content and high ash content, so the amount of charcoal will be greatly reduced, and the calories of the charcoal produced are not as high as the calories of the wood family. It can only be used for home use, so sales are not too ideal.
2: Equipment construction
A good horse is equipped with a good saddle. Only the equipment construction is very good, which can greatly improve the output of the biomass briquettes machine. Many customers purchase the charcoal briquette machine with cheap temporary plans and choose very cheap equipment. As everyone knows, this is the case. It hurts me. The equipment costs of each production factory are controlled by the old, steel material costs, labor costs, water and electricity costs, etc. The factory will not do a loss-making business. The cheaper the equipment you buy, the more the factory uses. The thinner the raw material, the lower the power of the motor. For a long time, the equipment not only consumes fast, but the output of small horse-drawn carts is not much higher.
 

3: Equipment maintenance
No matter what things are carefully maintained, you only need not to raise them. Sooner or later, I will pick you up. The very important thing in maintenance is the propeller of the sawdust briquette machine. It must be polished and corrected every time it is used. The other is to add grease to the equipment. Clearing out sundries for equipment, etc. There are specific analyses on the analysis books of the factories that require maintenance.
4: The skills of workers who build charcoal
Every production joint has strict requirements, such as the size of the raw material crushing, the humidity of the raw material, the proportion of each raw material entering the carbon when a variety of raw materials are mixed, the carbonization time during the carbonization, the temperature control, etc. If the worker does not mastering these techniques, whether it’s spicy, it’s not a good job, or the charcoal produced by the carbonization is not enough. It wastes raw materials and delays time.

Process of flat die wood pellet machine

 Biomass fuel granulation process. The basic process steps of biomass granulation are roughly similar. However, due to the different physical properties of the raw materials and the different working principles of the forming wood pellet machine, the specific process is still different. The key process steps of the flat die machine are specific. The introduction is as follows:

In the crushing process, when the flat mold is used for granulation, the smaller the particle size of the raw material, the easier it is for the particles to fill and fit each other. Therefore, the average energy consumption per unit output of the granulator is smaller. The wear speed is also slower, and the water permeability and hardness of the particles are higher. However, blindly pursuing the reduction of particle size will cause the energy consumption of the crushing process to rise sharply. Therefore, it should meet the processing requirements of flat die granulators under the premise of, make the particle size as large as possible. In fact, it is one of the advantages of the flat die wood pellet maker to be able to suppress large-size raw materials. Generally, for crop straw and other raw materials, the maximum particle size is required to be less than 2×2×30mm, while for wood raw materials, the requirements are more stringent.

In the granulation process, the dried material enters the granulation process and can be processed directly without quenching and tempering. Conditional manufacturers can choose automatic control system and die roll automatic gap adjustment device. The automatic control system adjusts the frequency converter of the feeding motor according to the change of the host current, so as to adjust the feeding amount in real time, which can effectively avoid the occurrence of machine blockage. The die roll automatic gap adjustment device can collect die roll gap data, and control the hydraulic system through feedback and comparison, so that the gap is consistent with the set value, and can be changed at any time during the production process. Generally speaking, the grinding roller gap should be as small as possible during the starting phase, which can reduce the starting torque and reduce the motor load. After entering the steady state work, the grinding roller gap should be slightly larger, which can increase the compression stroke and obtain hard and smooth particles. The setting of the gap change with time can be input into the control system. After starting, the machine can automatically adjust the die roll gap. Pressure rollers and flat molds are easy to wear parts and need to be replaced regularly. The service life of pressure rollers can be slightly longer, but it is best to replace the flat molds together. Generally, flat molds can work for 800-2000 hours, depending on the material and processing technology of the parts. According to the test results, the PM60 flat die pelletizer is suitable for processing biomass materials such as sawdust, sawdust and straw mixture, with a molding rate of over 93%, power consumption per ton under 55 kWh, and an hourly production capacity of about 800kg-900kg. There is nothing wrong with choosing Anyang ABC Machinery's pelletizing machine, sawdust pellet machine, and sawdust crusher. It is energy-saving and environmentally friendly. Our company guarantees product quality and will definitely provide you with the most satisfactory service!