Causes and treatment of sludge from oil press

The user newly purchased a peanut oil press, which will be able to operate normally after assembly, commissioning and running-in. Normally when the peanut oil press is in normal operation, the oil enters the press chamber from the hopper, and the oil is extracted from the fifth and sixth sections of the press chamber by the collision between the snail and the oil in the press chamber and the pressure of the press chamber. The cracks in the crushed strips flow out, and the cakes are tiled from the cake outlet to the inside of the oil mill project. Why does the peanut oil press appear slag? Usually when squeezing oil, the city stops pre-processing such as frying, selection, and tampering with the oil moisture and temperature to reach the appropriate premise and stop the oil extraction. Usually, many users stop the squeezing operation under the condition that the oil is not in the proper condition because of poor skills and little experience in pressing, so slagging occurs.

Generally, the residue from the oil press is at the fifth and fourth snails near the feed end.
Slagging is divided into normal slagging and many slaggings according to the state of pressing. What should I do if the amount of slagging is large?
1. If the slag from the mustard oil mill is filamentous, it is normal in this state.
2. If the oil press slags into flakes, it is an abnormal phenomenon. The strip pressure wire of the oil press is not pressed tightly, or it may be that the strips are strictly worn and flakes appear in the abrasion area of ​​the oil eye.

How to avoid a lot of residue from peanut oil press?
1. The peanut oil press mainly needs a running-in process, and it only needs to run-in well, so that the early oil pressing capacity reduces unnecessary trouble. You can click the precautions during the running-in period of the mustard oil business press to know how to run-in the oil press.
2. If the plasticity of the oil is not good, it will be difficult to produce the cake, which will increase the pressure in the press chamber of the oil press and cause slag. For the pressed oil, the moisture content and the temperature of the oil press can be increased appropriately to increase the plasticity of the oil.
3. Regularly check and protect the important parts of the soybean oil machine, such as whether the screw is damaged, whether the nut of each part is loose, whether the slippery part needs slippery growth, etc., only good oil press equipment capabilities are required to bring users Exceptionally good benefit.