Causes and treatment of sludge from oil press

The user newly purchased a peanut oil press, which will be able to operate normally after assembly, commissioning and running-in. Normally when the peanut oil press is in normal operation, the oil enters the press chamber from the hopper, and the oil is extracted from the fifth and sixth sections of the press chamber by the collision between the snail and the oil in the press chamber and the pressure of the press chamber. The cracks in the crushed strips flow out, and the cakes are tiled from the cake outlet to the inside of the oil mill project. Why does the peanut oil press appear slag? Usually when squeezing oil, the city stops pre-processing such as frying, selection, and tampering with the oil moisture and temperature to reach the appropriate premise and stop the oil extraction. Usually, many users stop the squeezing operation under the condition that the oil is not in the proper condition because of poor skills and little experience in pressing, so slagging occurs.

Generally, the residue from the oil press is at the fifth and fourth snails near the feed end.
Slagging is divided into normal slagging and many slaggings according to the state of pressing. What should I do if the amount of slagging is large?
1. If the slag from the mustard oil mill is filamentous, it is normal in this state.
2. If the oil press slags into flakes, it is an abnormal phenomenon. The strip pressure wire of the oil press is not pressed tightly, or it may be that the strips are strictly worn and flakes appear in the abrasion area of ​​the oil eye.

How to avoid a lot of residue from peanut oil press?
1. The peanut oil press mainly needs a running-in process, and it only needs to run-in well, so that the early oil pressing capacity reduces unnecessary trouble. You can click the precautions during the running-in period of the mustard oil business press to know how to run-in the oil press.
2. If the plasticity of the oil is not good, it will be difficult to produce the cake, which will increase the pressure in the press chamber of the oil press and cause slag. For the pressed oil, the moisture content and the temperature of the oil press can be increased appropriately to increase the plasticity of the oil.
3. Regularly check and protect the important parts of the soybean oil machine, such as whether the screw is damaged, whether the nut of each part is loose, whether the slippery part needs slippery growth, etc., only good oil press equipment capabilities are required to bring users Exceptionally good benefit.

How to choose a briquette making machine?

Where is the mechanism charcoal used?
ABC Machinery charcoal making machine factory answer: the mechanism of charcoal widely used, suitable for: (1) metallurgy (iron reducing agent, aluminum smelting electrode, steel ingot insulation agent);(2) Chemical industry (used to produce carbon disulfide, calcium carbide, carbon tetrachloride, etc.);(3) Construction (concrete special packing, insulating materials, refractory materials, etc.);(4) Rural horticulture (soil improvement, water and soil protection, smoked and Fried tea, etc.); (5) Animal husbandry (feed mixture, animal blocking and deodorization);(6) Domestic fuel (heating, baking, hot pot, etc.).

How big is the site for charcoal processing? How many people operate it?
ABC Machinery plant a: for small

sugarcane charcoal machine production site need 50-80 square can, water, electricity, three-phase electricity, there is a simple shed is better, in order to protect the life of the machine and the storage of raw materials; The complete set of charcoal briquettes equipment needs 2-3 people to operate.

How to produce mechanism charcoal without technology?
ABC Machinery factory answer: after the purchase of ABC Machinery manufacturers Machinery equipment, I can send technical personnel to your home, site guidance, layout production site, also personally teach charcoal machine production operation skills, just need to provide technical personnel accommodation can.

What are the tips for choosing a charcoal machine?
At present on the market the principle of charcoal machine equipment, wood chip log making machine process flow is basically the same, but the production of equipment is very different.

The 60-ton flour mill is installed and put into production

Congratulations, the 60-ton flour mill plant of the Shandong customer Mr. Xin has been officially installed and will be put into production. The 60-ton flour mill of Mr. Xin immediately attracted the attention of many people after the installation. Why? Because Boss Xin’s factory building is very beautiful, the new factory building is clean and tidy. The floor is covered with floor tiles, which are clean and bright. The walls and roof of the factory are also made of new materials in white tones. The whole installation is equipped with our display the 60-ton complete set of flour mill process equipment can be described as tall! The surrounding residents also praised it one after another, and the sanitary conditions can be described as reassuring! Mr. Xin’s flour business will begin to be put into production immediately, and we hope that this tall plant and flour milling equipment can bring about the benefits of wealth! Here I wish Mr. Xin a prosperous business! Our after-sales service to customers will also be very perfect. If Mr. Xin has any questions that need to be consulted or if there are any minor faults in the flour mill equipment, he can contact us as soon as possible, and we will solve it for you as soon as possible!