At present, the vast majority of users invest in the new type of straw charcoal machine, not only to promote the development of China's energy conservation and environmental protection cause, but also to create better value in the industry, in the choice of the new type of charcoal machine, users need to pay attention to what issues?
New type of straw charcoal machine production line equipment installation first step: before starting the new type of straw charcoal briquettes machine, need to do the preparation work and operation procedure.
When debugging the host to verify the equipment, first let the host manually rotate to see whether it is stable, and then use the size of the gear equipment to check whether the operation is normal; Through the circuit diagram installation diagram, install the correct circuit, start.
Motor, check whether the operation is normal; Secondly, open the dust removal equipment, check the normal pressure of the air pump, whether there is leakage, dust removal; Thirdly, it is necessary to open the burner, adjust the flame appropriately according to the temperature, and control the temperature strategy; Adjust the speed of the dryer to the right range.
The new wood chip log making machine is a complete set of equipment, including pulverizer, dryer, rod making machine and carbonization furnace. In the whole operation process, the material is first crushed, then dried by the dryer, after the rod making mechanism into the carbonization process.
The moisture content of the material is controlled between 6% and 12%, while the standard setting of the dryer requires the outlet temperature to be controlled at 60 degrees and the moisture content to be controlled between 35% and 6%.Operators can also adjust the drying temperature according to their own needs, set the export temperature unchanged, raw material moisture content does not exceed 35%.
